PULVERISETTE 19 Universal Cutting Mill variable speed 50-700 rpm
Variable 50–700 rpm for powerful comminution Due to the variable rotational speed adjustment in increments of ten between 50 and 700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution. The low-speed PULVERISETTE 19 comminutes hard, tough-elastic samples with a maximum feed size of 70 x 80 mm and a throughput of 60 l/h. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided. One special advantage: Straw, films and similar materials can be fed in up to their full length without additional preparation. And the PULVERISETTE 19 is also ideal for RoHS tests. เครื่องบดย่อยธัญพืช และพลาสติก
เครื่องบดย่อยธัญพืชและพลาสติก Universal Cutting Mill variable speed 50-700 rpm ยี่ห้อ FRITSCH รุ่น PULVERISETTE 19
เป็นชุดเครื่องมือตั้งโต๊ะหรือตั้งพื้น พร้อมอุปกรณ์ใช้สำหรับบดตัวอย่างแห้ง ที่มีลักษณะ แข็งปานกลาง ซึ่งตัวอย่างที่สามารถบดได้ เช่น ไม้,ราก ,ใบ, อาหารสัตว์, ธัญพืช ,กระดาษ ,ยาง , หนัง , พลาสติก, ผ้า , เส้นใย และอื่น ๆ ที่เกี่ยวข้องกับการเตรียมตัวอย่างโดยการลดขนาดตัวอย่าง เพื่อนำไปวิเคราะห์ทางกายภาพและเคมี ต่อไป
AT A GLANCE
- Rotor speed 50-700 rpm, variable adjustable
- Optimised Clean Design for maximum ease of cleaning
- Corrosion-resistant stainless steel version 316L available
- Maintenance–free 2.8 kW three-phase motor with frequency converter
IDEAL FOR
- PLASTICS AND TEXTILES
- AGRICULTURE AND FORESTRY
- ENVIRONMENT
- ROHS
- ANALYTIC
- CONSTRUCTION MATERIALS
- CHEMISTRY
- FOOD STUFFS
| Working principle | cutting |
| Optimal for material type | hard, tough-elastic, temperature-sensitive samples |
| Cutting tools | rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives |
| Materials of the cutting tools | hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01 |
| Max. feed size (depending on the material and funnel) | 70 x 80 mm |
| Max. throughput (depending on the material and sieve size) | 60 l/h |
| Final fineness (depends on sieve cassette also available in further perforations) | 0.2 – 10 mm |
| Feeding | batchwise/continuous |
| Variable rotor speed | 50-700 rpm |
| Rotor peripheral speed | 0.26-3.66 m/s |
| Drive | Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque |
| Electrical Details | 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve cassette used) | LpAd = 75 dB |
| Weight | 83 kg |
| Dimensions (W x D x H) | table mounted or on support frame 44 x 79 x 56 cm |
The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 50-700 rpm is also available in the following voltages and versions:
| Order no. | Electrical details / Torque |
| (three-phase motor with frequency converter and flywheel mass for stabilising the drive torque) | |
| 19.3040.00 | for 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm |
| 19.3000.00 | for 200-240 V/1~, 50-60 Hz, 2350 watt, 26 Nm |
| 19.3010.00 | for 100-120 V/1~, 50-60 Hz, 1725 watt, 24 Nm |
The PULVERISETTE 19 with voltage of “/3~”can only be operated on a three-phase supply network.
Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power.
The single-phase versions of the Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter.
Unique grinding chamber geometry
The sample material is comminuted according to the cutting principle of scissors between the cutting edges of the rotor and the fixed knives in the grinding chamber until the desired final fineness is achieved. Unique grinding chamber geometry: The grinding chamber is designed with minimal dead space and progressive cutting geometry between rotor and fixed knives. The sample material is continuously moved during comminution and cannot settle anywhere. In conjunctions with the special air flow, this is the basis for swift, blockage-free operation and fast cleaning without residue.
Running stabilisation due to flywheel mass
The Universal Cutting Mill PULVERISETTE 19 is equipped with a flywheel mass to stabilize the drive torque. This ensures stable operation even for extreme short-term load, as well as an optimal comminution result.
- Powerful variable rotational speed of 50–700 rpm
- Max. feed size 70 x 80 mm
- Throughput of up to 60 l/h
- Defined final fineness due to interchangeable sieve cassettes 0.2 – 10 mm, (further sieve sizes available)
- Collection vessel 0.25 litres to 60 litres
- Optimised Clean Design for maximum ease of cleaning
- Practical operation directly on the front panel
- Maintenance–free 2.8 kW three-phase motor with frequency converter
- Single-phase versions with maintenance-free three phase frequency converter
- Externally adjustable cutting gap
- Double cone bearing of the rotor for long service life
- Standard funnel for long solids or protected funnel with sample pusher
- Different rotors for multi-functional use
- Rotor knives and fixed knives are exchangeable for long-lasting quality
- Optimum airflow for fast comminution and anti-clogging
- Sample exhaustion with FRITSCH cyclones
Unmatched easy cleaning!
While you are still tightening the screws on other mills, your FRITSCH Cutting Mill is already clean. Because with just a few simple motions the entire grinding chamber can be opened and rotor and sieve cassette can be removed without tools. The housing and lid can be lifted back completely, and the grinding chamber lid can be completely removed from the hinges.
The result: a completely open empty grinding chamber with minimised dead space for easy quick cleaning and safe protection against cross-contamination.
FRITSCH-Plus: The sieve cassettes with square perforation made of stainless steel 316L are laser welded and ensure with less dead space a clearly simpler cleaning.
Removable wear-free labyrinth seals for fast, residue-free cleaning
The labyrinth seals made of stainless steel – on both sides of the rotor as well as on the shaft and in the lid – are wear-free and offer effective contamination protection and no additional heat effect for your samples.
Effective comminution with dry ice and liquid nitrogen
Due to the well-conceived instrument design and the materials used, it is no problem to comminute pre-cooled materials or samples embrittled with liquid nitrogen.
The improved breaking behaviour enables efficient comminution also of sticky, tough-elastic or temperature-sensitive materials with dry ice or after previous embrittlement of the sample with liquid nitrogen.
Optimal sample exhaustion with FRITSCH Cyclone separators
Clean, convenient, cool: Combine your FRITSCH Universal Cutting Mill PULVERISETTE 19 with a FRITSCH Cyclone separator for sample exhaustion. Its strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples.
At the same time, the powerful airflow of the FRITSCH Cyclone separators enables the use of finer sieve cassettes to achieve a higher final fineness – even for materials, which are otherwise difficult to comminute finely.
The result: especially fast and efficient comminution with minimised thermal load and significantly higher throughput – in addition to quick and easy cleaning.
The FRITSCH high-performance Cyclone separator completely made of stainless steel 304 is particularly indispensable in the analytical sector and in the food and pharmaceutical industries, and for the processing of heterogeneous mixtures of material, e.g. in the cement industry. Especially for exhaustion of small sample quantities, we designed the compact FRITSCH small volume Cyclone separator.
We also offer a standard Cyclone separator.
DETAILS ABOUT THE FRITSCH CYCLONES
Completely in stainless steel for the analytical sector, food and pharmaceutical industry
The Universal Cutting Mill PULVERISETTE 19 is also available in a corrosion-resistant stainless steel version 316L, whose materials are resistant to alkalis and acids and conform to the guidelines of the food and pharmaceutical industry.
DETAILS ABOUT THE PULVERISETTE 19 IN THE CORROSION RESISTANT STAINLESS STEEL VERSION 316L
Complete operation at the front
The well-designed control panel keeps all functions, including the on/off switch, easily accessible on the instrument’s front panel. The rotational speed is set in increments of ten with the plus/minus buttons and shown on the digital display.
Configure your Universal Cutting Mill PULVERISETTE 19 with variable rotational speed of 50– 700 rpm exactly to your specific application
The Universal Cutting Mill PULVERISETTE 19 is delivered without funnel, cutting tool set (consisting of rotors and fixed knives), sieve cassette, collection vessel and stands. Various funnels, collection vessels, rotors with fixed knives, sieve cassettes and stand made of various materials enable you to configure the Universal-Cutting Mill exactly for your application.
VIEW EXTENSIVE ACCESSORIES
Augmented reality (AR) is a technology that superimposes a computer-generated image on an user’s view of the real world, thus providing a composite view. In soccer broadcasts, for example, you’ll find augmented reality when superimposing distances of free kicks using a circle or a line. We took advantage of this effect and programmed an app for you. Simply download the free-of-charge app in the app store of your mobile device and place our instruments as the PULVERISETTE 19 live in your laboratory.
